Skip to main content
#
Armortech Resurfacing Inc.
rss feedemail usour twitterour facebook page youtube
prev
next
Monday, February 18 2019

Oregon Coast...This was one of the funnest epoxy floor projects we've done in a while. The client chose the colors to be used, but gave us the artistic freedom to do something really unique. We love that! Our clients, the new owners had recently purchased the home overlooking Nehalem Bay in Wheeler, Oregon. The floor itself is a concrete slab on the upstairs, interior of the home. The three individual slabs were seperated by a beam embedded between the areas and acted as a control joint. The floors also had radiant heat. The slabs had originally been stained and sealed, but over the years had deteriorated and were suffering from extensive cracking throughout. The client, the owner of several pets, had concerns that cracks in the slab could trap pet urine and in the end result in a stinky mess.

To solve that potential problem the clients opted to install a seamless epoxy floor, but they wanted it to look cool too. In step Armortech. After grinding this floor to manfacturers specs, we filled the cracks with Elite Cretes  MERCAP-445™. A 100% solids, low viscosity, structural epoxy adhesive designed for repairing cracks in concrete that is suitable for both above grade and below grade applications.

After which, we installed two coats of a solid white epoxy base coat and followed up with a decorative metallic epoxy coat consisting of four metallic colors, copper, coffee, brass and charcoal pearl. Once the decorative coat had cured, we sanded and applied a seal coat over the exposed wooden beams. Once cured we then flooded the entire floor including the beams in a single coat of clear E100-VR1™ UV Resistant Epoxy, essentially embedding both the decorative coat and the wooden beams beneath a single, seamless coat of epoxy. VR1 clear epoxy is an excellent protective coating, is 100% solids, UV resistant, low viscosity, clear, high gloss epoxy coating system specifically designed for incidental interior exposure to UV attack. It is not effected by high humidity, is resistant to microbial growth and fungus, and provides exceptional hardness to provide years of service. Once cured, about 8 hours, the Armortech crew applied a final slip-resistant topcoat of AUS-V. AUS-V is a high quality, extremely durable, clear, two component, protective urethane coating for epoxy coatings such as the E100™ Series of epoxies.

In the end everyone won. Our clients got the seamless, and uniquely beautiful floor they wanted. And, we got to have a great time exploring the beautiful, small towns of Wheeler and Nehalem, all while letting loose our creativity. Good times ;)

Watch the full video below:

Wish your floors looked like this? Or, maybe you have your own custom design in mind? Call the pros at Armortech, and lets talk about the scope of your project.

OREGON: (503) 791-8780
WASHINGTON: (360) 225-1488
TOLL FREE: 1-866-308-2400

OR CCB# 215377
WA LIC# ARMORRI834MF

 

 

 

 

Call 1-866-308-2400 for a free estimate. Serving Oregon & Washington.

Posted by: Armortech AT 03:18 am   |  Permalink   |  0 Comments  |  Email
Comments:

Post comment
Name
 *
Email Address

Message
(max 750 characters)
*
* Required Fields
Note: All comments are subject to approval. Your comment will not appear until it has been approved.

About Armortech

 

Surface restoration and refinishing is not just what we do, it is our passion and our craft. And, it is our dedication to our craft that allows us to approach each project with enthusiasm and a desire to provide the highest level of craftsmanship each and every time.

Prior to establishing Armortech Resurfacing, the two founders honed their craft, and accumulated decades of experience working for others in the construction industry, including one of the top land-based flooring contractors in the country. Over those years, they not only mastered the multitude of techniques and procedures required to expertly apply a variety of epoxy products to many very different surfaces. They also gained the project management skills needed to successfully run multiple teams of skilled tradesmen and laborers for an interior design firm servicing some of the biggest names in the cruise line industry, in drydocks from Europe to the Bahamas.

After reaching the proverbial glass ceiling, they decided to break out on their own and formed Armortech Resurfacing, Inc. with the vision of bringing their decades of expertise working with specialty coatings and seamless epoxy flooring to their community, friends, and neighbors.

We look forward to the opportunity to earn your business and are confident our meticulous attention to detail, dedication to quality craftsmanship, and service will make us your first choice when considering a specialty coatings contractor.

Site Mailing List 

Armortech Resurfacing, Inc., operates in Oregon & Southwest Washington.
Our service area includes the greater Portland Vancouver metro area, the North Oregon Coast and the following cities.


SW Washington
Amboy, WA - Ariel, WA - Battle Ground, WA - Brush Prairie, WA - Camas, WA - Castle Rock, WA - Chelatchie, WA - Cougar, WA - Hazel Dell, WA - Kalama, WA - Kelso, WA - La Center, WA - Longview, WA - Mill Plain, WA - Minnehaha, WA - Hockinson, WA - Orchards, WA - Ridgefield, WA - Salmon Creek, WA - Vader, WA - Vancouver, WA - Washougal, WA - Winlock, WA - Woodland, WAYacolt, WA - Yale, WA

Portland Metro Area
Beaverton, OR - Clackamas, OR - Gladstone, OR - Gresham, OR - Happy Valley, OR - Hillsboro, OR - Lake Oswego, OR - Milwaukee, OR - Oregon City, OR - Portland, OR - Tigard, OR - Tualatin, OR

North Oregon Coast
Astoria, OR - Gearhart, ORSeaside, OR - Warrenton, OR
 

Copyright © 2017-2024 Armortech Resurfacing, Inc. All rights reserved.