Is your sink, vanity, or countertop damaged, hard-to-clean, or simply outdated?
Are the cultured marble sinks and vanities in your home, rental property, or commercial facility beginning to show their age? Sink and vanity combos made from cultured marble, as well as those made from ceramic tile, Formica, and other types of laminates, have been popular for years. However, color and design trends change way too often and before you realize it your home, or rental units can become dated looking, hard to rent, and in need of a facelift. And let’s face it, regardless of what color you choose to paint the walls, or what type of flooring you decide to upgrade to those countertops everyone loved in the 90’s just won’t fit into the modernly updated color scheme you hope to achieve, no matter how hard you try.
The good news is all of these surfaces can be refinished in as little as one day, with a modern solid color, or beautiful stone, granite, or marble like finish. Even if your existing sink and vanity countertops are chipped, cracked, or have burn marks, the skilled refinishers at Armortech can repair and resurface them with a brand new, durable, and modern looking surface that will fit beautifully into your updated décor. And, we can do it for only a fraction of the cost of traditional sink, vanity and countertop removal and replacement.
Even for a handy DIY homeowner replacing a sink and vanity, or countertop can be a costly and time-consuming chore. In addition to the actual cost of the replacement sink, vanity, and countertop, you have demolition, labor and possibly even plumbing costs associated with the project. Not to mention the disposal and dump fees, grout, caulk, etc.… you get the picture.
Before you tear out and replace your existing cultured marble sink, vanity or countertops, call the refinishing pros at Armortech Resurfacing. For much less than the cost of remodeling and replacement, our friendly, factory trained sink, and vanity refinishers can apply a brand new, durable, easy to clean, modern surface to your cultured marble sink, vanity, or countertops. And, it can be done without the demolition and exorbitantly high-costs associated with traditional methods of sink, vanity, and countertop replacement.
What exactly is sink & countertop refinishing?
Sink, vanity, and countertop refinishing is a process in which specialized equipment, products, and techniques are used to apply a new, hard and durable epoxy surface over an existing cultured marble, sink or countertop. Professional Kitchen and bathroom refinishing is a smart, practical, and affordable means of completely changing the look of your existing sink, vanity, or countertop without the need for removal, or replacement.
What color options are available?
In addition to the many solid color options we have available, our expert sink, vanity, and countertop refinishers can also recreate the look of stone, granite, or even your favorite marble, or custom finish.
Update your old, square, and boxy laminate countertops edges with smart & stylish upgrade to a modern bullnose countertop profile.
If you would like, our technicians can also upgrade the square and boxy look of your laminate countertops with a modern bullnose trim prior to refinishing, to give your updated countertops a distinctive, and authentic solid surface look.
Sink and countertop refinishing techniques work equally well on kitchen & bathroom countertops, vanities, bars, and cultured marble sinks.
Can you explain the sink & countertop refinishing process?
At Armortech, we use several different methods and techniques which vary depending on the countertop material to be resurfaced, and the desired look to be achieved.
Briefly, the steps involved are as follows. After a thorough cleaning with specialized industrial cleaners, which remove any, oils, dirt, grease, or soap residue on the surface, any needed repairs to the surface such as chips, cracks, etc., will be made. If you have requested a new bullnose edge, it will be installed at this time. After which, the surface will be prepped for primer, by “roughing” the surface to be refinished. In the case of a ceramic tile countertop, this is accomplished by acid etching the surface. Whereas, cultured marble and laminates like Formica will instead receive a thorough and detailed sanding to prepare the surface. Once the prep work is complete, an appropriate primer and bonding agent is applied to promote adhesion of the new top coats. Depending on the type of look and finish you have requested several consecutive applications may be required. As a general rule, solid color, stone, and faux granite finishes will be applied with specialized spray equipment, while faux marble and other custom looks may require techniques that are applied by hand.
Regardless of the techniques used, when we are done your old sinks and countertops will not only look great, they will be easy to maintain, and be ready to provide you years of extended service.
How long does the refinishing process take?
While the size of the area being refinished and the type of finish being applied do play a factor in the time needed to complete a particular project. As a general rule, most countertops are able to be completed in only one or two days.
Remodeling on a budget? Surface refinishing may be the answer.
If you are a home owner on a budget, a landlord, apartment, or hospitality manager in need of updating the look of the sinks, vanities, and countertops in your place let the refinishing pros at Armortech show you a smart, alternative to the mess and cost of traditional sink, and countertop replacement. And how we can make your existing kitchen & bathroom countertops, vanities, bars, cultured marble sinks, tile walls, shower surrounds, bathtub surrounds, backsplashes, and even floors look and feel as good or better than new, and for only a fraction of the cost of replacement.
Refinishing your existing cultured marble sinks and countertops will save you both time & money.
At Armortech, we provide a broad selection of custom solutions to make your home or business more valuable and more beautiful, all while delivering you the highest quality craftsmanship and products on the market today. Please take a little time to look through our site and feel free to contact us if you have any questions or would like to schedule a free on-site consultation.
Call Armortech Resurfacing, the Portland-Vancouver areas trusted kitchen and bathroom refinishing contractor today at 1-866-308-2400 to receive a free, no-obligation estimate.
We look forward to the opportunity to earn your business.